Simrad Halo 2006 50w Radar System 6' Antenna 20m Cable
SKU: 84146268557

Simrad Halo 2006 50w Radar System 6' Antenna 20m Cable

Sale price$3543.30 Regular price$3937.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 8 - Jul 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Simrad Halo 2006 50w Radar System 6' Antenna 20m CableSimrad Halo 2006 50w Pulse Compression Radar System with 6' Antenna, 20m Cable and RI 50 Model: 000 15760 001 HALO 2000 50W power for longer range (from 6m to up to 72nm) and higher resolution target detection Advanced pulse compression technology with beam sharpening Simultaneous Dual Range operation Easy operation with Harbour, Offshore, Weather, and Bird modes Track up to 50 targets per defined area with ZoneTrack (two areas can be defined)

Simrad Halo 2006 50w Pulse Compression Radar System with 6' Antenna, 20m Cable and RI-50

Model: 000-15760-001
  • HALO 2000 - 50W power for longer range (from 6m to up to 72nm) and higher-resolution target detection
  • Advanced pulse compression technology with beam sharpening
  • Simultaneous Dual Range operation
  • Easy operation with Harbour, Offshore, Weather, and Bird modes
  • Track up to 50 targets per defined area with ZoneTrack (two areas can be defined)
  • VelocityTrack Doppler technology for collision avoidance
  • Dangerous Target Alerts for radar and AIS targets
  • Ready instantly from standby, and in 16-25 seconds from power-on

Benefit from safer navigation and unmatched ease of use with the new HALO® 2000 and 3000 Open Array radars. Advanced Pulse Compression technology allows you to detect birds, hazards and storms with superior precision across both short and long distances. While the range of Preset Modes and enhanced power provide constant peace of mind.

The HALO® 2000 radar offers a premium experience on the water. An impressive 50 W of power — equivalent to a 12 kW magnetron radar — delivers an unrivaled combination of short- and long-range coverage that enables you to see targets from six meters (20 feet) out to 72 nautical miles with exceptional clarity. Pulse Compression technology powers confident navigation through marinas, and superior storm and hazard detection across a greater distance. The HALO® array series not only increase situational awareness and collision avoidance but also offer higher-resolution target detection you won’t find in lower-powered radars.

The HALO 2000 series boast an array of new features that make navigation safer and offer peace of mind. ZoneTrack™ brings the best of professional boating technology to recreational users, allowing them to track up to 50 vessels within a defined area, automatically detecting their course and speed. HALO’s Dangerous Target Alerts highlight range, graphical bearing, and heading of other vessels relative to yours. Meanwhile, VelocityTrack™ uses Doppler technology to show targets color-coded so you can identify potential threats at a glance. Because, when it comes to safety, situational awareness is everything.

The next generation of pulse compression radars, HALO 2000 and 3000 build on the features that have made HALO an established choice for boaters across the globe. The solid-state technology gets you up and running quickly, and HALO’s low-power pulsed transmissions make it safe to run in harbors and marinas. Dual Range mode allows you to keep an eye on distant weather cells while monitoring channel markers and high-speed watercraft up close. Advanced digital signal processing gives you a clearer view of targets, helping eliminate sea clutter, while Beam Sharpening provides enhanced separation between small or distant targets. Finally, HALO 2000 and 3000 have the same footprint as their predecessors, making it easy to upgrade your current system. It’s also compatible with a range of Simrad® chart plotters, including NSS™, NSX™, NSO™, and GO™.

Designed with an intuitive interface HALO arrays make operation easier with smart features like Harbour, Offshore, Bird, and Weather modes. These Preset Modes require no manual tuning — just select your chosen mode and go. This simple approach also extends to fishing, with HALO’s powerful bird-finding capability which enables boaters to find flocks of birds and — more importantly — schools of fish at a distance.

Specifications
Environmental
Operating temperature -25°C to +55°C (-13°F to +131°F)
Relative humidity IEC60945 Exposed product
Vibration IEC60945 Exposed product
UV IEC60945 Exposed product
Waterproofing IPX6 for the pedestal and antenna, IPX5 for the RI-50 interface module
Relative wind velocity HALO 2000 and HALO 3000 radars with 3 ft, 4 ft or 6 ft antenna have a wind rating of 80 knots at 48 rpm in both 24V and 12V systems.
Power
Power consumption 235 W (peak, 12V) at maximum wind velocity, 380 W (peak, 24V) at maximum wind velocity, 45-60 W (average) at zero wind velocity, 11 W (average) in standby mode. Refers to RI-50 input terminals
DC Input Radar system input 12 OR 24 V DC into the RI-50: 12 V Systems 10.8 - 15 V DC, 24 V Systems 20 - 31.2 V DC. Pedestal voltage input is 50 V DC nominal generated by RI-50
Power up time 30-40 seconds from POWER OFF to TRANSMIT
Physical
Height 429 mm (16.88") with antenna mounted
Antenna swing circle diameter 6 ft model: 6.72 ft / 2047 mm / 80.59"
Pedestal weight 20.3 Kg (44.8lb)
RI-50 weight 1.6 Kg (3.5 lb)
10 m (33 ft) cable weight 1.6 Kg (3.5 lb)
Antenna
Rotation speed 16 to 48 rpm depending on operating mode
Beam width 6 ft model: 1.2°+/-10% (-3 dB width) — 0.8° with Beam sharpening mode on
Beam width Vertical 25° +/-10 % (-3 dB width)
Plane of polarization Horizontal polarization
Sidelobe level 6 ft Below -23 dB max. (within ±10°), Below -30 dB max. (outside ±10°)
Radar
Peak power output 50 W ± 10% under any transmit condition — up to 10% duty cycle max
Transmitter Solid state module with no long-term transmitter power degradation
Transmitter frequency Synthesized - Upper half of X-Band 9.390 - 9.495 GHz
Pulse length 0.04 usec
Chirp length 2-64 usec
Chirp bandwidth 2-48 MHz. Up to 1 pulse and 4 chirps in a burst with burst repetition rate of 500-3000Hz. Range and mode dependent.
Effective pulse compression ratio less than 150 in all modes.
Instrumented range 72 nm
SART/RACON triggering Yes — trigger distance: about 1nm max — weather, sea state, and SART position dependent
Duplexer Circulator and isolator
LNA GaAs front-end
IF section Center frequency: 31.25 MHz Bandwidth: 50 MHz max.* A/D; 16 bit 125 MSPS *Narrower bandwidths defined by signal processing
Noise figure 5 dB (Min) at antenna input
Compass safe distance; Pedestal STD. 1.0 m (3.3 ft), Steer 0.5 m (1.6 ft)
Compass safe distance; RI-50 1.0 m (3.3 ft)
Other
Communication ports Ethernet 10/100 Base-T RJ-45 for radar data and control
Transmit synchronization RS-422 output
Remote power on yes
Antenna park hold Yes (while radar is unpowered)
Motor Brushless with solid state commutation with electromagnetic braking for parking

What's in the Box:
  • Halo 200x Pedestal
  • RI-50 Power Supply
  • 20m Power and Ethernet cable
  • 6' Antenna
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 84146268557

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 88 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Pat Traynor
Draper, US
★★★★★ 1
No returns and no support. If it doesn't work properly, too bad.
Style: Printer & Inks, Style: Printer & Inks
I was fairly happy with my Epson ET 2800, but was told that I'd get better colors with the F170. So I bit the bullet. The installation went smoothly and I was printing in short order. It was when I started printing items that had some dark gray that I noticed the problem. It was printing green. I contacted Epson tech support and they answered the phone almost immediately. (And how rare is that??) The woman I spoke with seemed to be familiar with the problem and advised me to modify the printer preferences and change the color correction from "ICM" to "No color correction". Well, it wasn't printing green anymore. Now the grays were brown. At this point, she ran out of ideas and gave me an email address for the second level of tech support and asked if I'd send a photo of the printed fabrics showing the problem. I did. That was over three weeks ago. I've sent a couple of followup emails, but they're ignoring me. But the best news was discovering that there are no returns on this product. I didn't think that was a thing with Amazon and I've never had any problems before. So now the 30-day return window is about to elapse and it appears that I'm stuck with an oversized doorstop. In the photo I'm including with this review, the fabric on the upper-left was printed with my Epson ET 2800. On the upper right, the F170 with ICM color correction. On the bottom, the F170 with no color correction.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 12, 2025
C
Verified Purchase
Cherished1
Waukegan, US
★★★★★ 5
Epson SureColor F170 Sublimation Printer Rocks!
Style: Printer & Inks, Style: Printer & Inks
TI’m a newbie at sublimation, and this is my first sublimation printer. I love it! I can’t wait to make more things! I like that it’s not too large, but still can print up to 8.5x14”. The quality seems to be really good, but I also don’t have any other printer to compare it to. This was my very first project! I’m very happy with it so far!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
A
Verified Purchase
Apiffanie George
Battle Creek, US
★★★★★ 5
Great product, quality colors and vibrant prints
Color: 1BK/1C/1Y/1M
Best Sublimation Ink I have found so far. Great size bottles for the price you pay. Lasts a long time and the colors print great and when you press the print the colors come out BEAUTIFUL and VIBRANT! Dries quickly after printing so no worries on smudging but even after sitting over a month on the paper still presses like you printed it that day!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
B
Verified Purchase
Bel Anne Craft Studio
Omaha, US
★★★★★ 5
Consistent, Vibrant Results That Match My Designs Perfectly
Color: 1BK/1C/1Y/1M
I’ve been consistently purchasing this Hiipoo sublimation ink for my sublimation printers, and I’ve been extremely pleased with the results. The print quality is excellent, with vibrant colors and clean transfers every time. What I really appreciate is how true the final product turns out compared to my original designs. The colors stay accurate, and the finished results look exactly the way I intended, which is very important for my projects and products. This ink has been reliable and consistent, and I will definitely continue using it for my sublimation work.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
A
Verified Purchase
Amazon Customer
Boise, US
★★★★★ 5
Perfect to the job
Color: 1BK/1C/1Y/1M
No issues with this ink. Used it to turn a printer into sublimation printing and the ink is perfect and easy to fill.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026

recommand products