Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Mobiele ventilator PE Ø1070mm 470W 230V MW ToolsDeze industrile draagbare kunststof ventilator met een diameter van 1070 mm is ontworpen voor intensief gebruik in werkplaatsen, bouwomgevingen en industrile toepassingen. Dankzij de stevige PE constructie is hij bestand tegen transport, stoten en vochtige omstandigheden. Belangrijkste specificaties Diameter ventilator: 1070 mm Spanning: 230V Vermogen: 470 W Aantal snelheden: 3 Luchtdebiet: 470 410 365 m min Totale druk: 230 Pa Geluidsdruk: 76 dB(A)
Deze industriële draagbare kunststof ventilator met een diameter van 1070 mm is ontworpen voor intensief gebruik in werkplaatsen, bouwomgevingen en industriële toepassingen. Dankzij de stevige PE-constructie is hij bestand tegen transport, stoten en vochtige omstandigheden.
Belangrijkste specificaties
- Diameter ventilator: 1070 mm
- Spanning: 230V
- Vermogen: 470 W
- Aantal snelheden: 3
- Luchtdebiet: 470 / 410 / 365 m³/min
- Totale druk: 230 Pa
- Geluidsdruk: 76 dB(A) op 1 meter
- Beschermingsklasse: IP20
Afmetingen en gewicht
- Lengte: 1110 mm
- Breedte: 375 mm
- Hoogte: 1145 mm
- Gewicht: 40,5 kg
Belangrijkste kenmerken
- Rotatiegegoten PE-behuizing (polyethyleen): slagvast, roestvrij en geschikt voor zware omstandigheden
- Geschikt voor vochtige en stoffige omgevingen
- Stapelbaar ontwerp voor eenvoudige opslag en transport
- 4 grote massieve kunststof wielen voor mobiliteit
- Stabiel frame met lage trillingen → stille werking
- Beschermrooster aan beide zijden van het ventilatorblad
- Smalle, compacte bouw voor flexibel gebruik
- Inclusief 2,5 meter kabel met kabelhouder
Toepassingen
- Ventilatie van werkplaatsen en productieruimtes
- Koeling van machines, motoren en apparatuur
- Luchtcirculatie in containers, kelders en gesloten ruimtes
- Droging van bouw- en renovatieprojecten (vloeren, pleisterwerk, etc.)
- Verplaatsen van lucht in zuurstofarme of warme omgevingen
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 1375 reviews
Sort
Product Reviews
★★★★★ 5
Works well on 2003 Corvette.
Color: Carbon Fiber, Size: 2 Pack
I purchased these for usage in my 2003 Corvette convertible. As much as I enjoy the vehicle, they are extremely insufficient for storage. No "usable" built-in cup holder, no pockets and no flat area that can hold a cell phone. The console and glove box are not ideal in this day and age since the phones are used constantly. Enter these excellent little holders. They mount perfectly on the central vent in the dash. If you slide the bases as far as possible to each side and then tighten them down, the base will overlap the non-moving portion of the vent and keep the unit quite stable. I would suspect this is applicable for any vehicle that has the traditional flat vent fins. The holder has a hook that when fished into the vent, clasps over the back of one of the fins. By hooking the fin, once tightened down (careful not to over due this as the vents are just plastic) the installation is as stable as you can ask for vs any of those goofy clamp types that slide off quite easily, especially as they age and sun softens the pads. Benefit from my mistakes on those bad purchases and stay away from clamp mounts. If you have flat fin vents and are looking for a reliable means to mount a phone, this may be just right for you.
Best of luck.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
★★★★★ 4
Good product, but...
Color: Dark Black, Size: 1 Pack
Easy to install. Like the product. The holder does not hold the phone position. It flops down alot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
★★★★★ 5
The Perfect Phone Mount.
Color: Dark Black, Size: 1 Pack
It’s the perfect size, easy to install, and works perfectly. I have a 15 pro max iPhone, and it fits perfectly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
Well built and removes cleanly.
Color: Dark Black, Size: 1 Pack
Seems to be very solid and it was a little bit tricky to get it located on the vent blade properly, though that might just be due to the vents shape in my Highlander. I really like that it can be easily moved from one vehicle to another if needed without leaving adhesive residue like my last mount did. The only concern I have is whether the vent blade will support the weight long term. Time will tell I guess.
EDIT: This fits all of the vents on my 2011 Highlander great. On my 2022 Highlander it will only attach to the center vents and then just barely hooks on after angling the vent blades enough for the hooks to grab. Even then the mount only makes contact at the very top and bottom of the vent opening. It works, but I wouldn't recommend it as ideal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026
★★★★★ 5
Works great
Color: Dark Black, Size: 1 Pack
Great product which is easy to use and affordable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026
recommand products
Smartwatch Bluetooth Rond Scherm voor Dames en Heren
59.99
Damesondergoed Naadloos Ademend voor Dagelijks Droog Comfort
39.99
Lunchbox Dubbelwandig Met Bouwblok Design voor School en Werk
34.99
Waterdichte Laptop Sleeve 13 voor MacBook Air
84.99
Magnetische Racebaan voor Kinderen Flexibel en Verlicht
49.99