Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
RDL DS-PA3 Audio Amplifier Wall Plate - 3.5WThe D SERIES PA3 is a high efficiency 3. 5 W power amplifier with two line inputs and an amplified output to drive a 4 or 8 ohm speaker. The PA3 features a balanced line level input that may be connected unbalanced. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. The amplifier features a stereo Mini Jack input on the front panel. The input is designed to receive standard 10 dBV consumer level signals
The D SERIES-PA3 is a high efficiency 3.5 W power amplifier with two line inputs and an amplified output to drive a 4 or 8 ohm speaker. The -PA3 features a balanced line level input that may be connected unbalanced. The gain range will accommodate standard unbalanced levels as well as professional balanced levels.
The amplifier features a stereo Mini-Jack input on the front panel. The input is designed to receive standard -10 dBV consumer level signals from sources such as a computer or personal media player. The left and right audio signals received on the Mini-Jack are summed to mono and amplified. When a source is connected, the rear-panel input is switched off. The amplified output level is controlled by a front-panel volume control.
A recessed slide switch on the side of the chassis is set during installation. This switch determines the sensitivity of the balanced rear-panel input.
Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency Class D output stage produces negligible heat for all levels of expected voice or music modulation.
The D SERIES-PA3 is designed to be mounted in a wall box. The front panel does not include any illuminated indicators, making the -PA3 ideally suited to installation in dark rooms or areas. Wiring is connected through a rear-panel detachable terminal block. Module operation is from a 24 Vdc ground-referenced power supply.
Features
- Wall-Mounted Amplifier with 2 Inputs
- Balanced Input on the Rear Panel
- Mini-Jack Input on the Front Panel
- Automatic Switching Between Inputs
- Source Selection Using Solid-State Switching
- Front-Panel Gain Adjustment
- 3.5 Watt RMS Audio Amplifier into 8 Ohms
- 6.5 Watt RMS Audio Amplifier into 4 Ohms
- Output Drives 4 or 8 Ohm Speaker
- Speaker Output on the Rear Panel
- High-Efficiency Class D Operation
- Speaker Output Connection on Detachable Terminal Block
- Ultra-Compact All Metal Construction
- Thermal and Short-Circuit Protection
Specifications
| Inputs (2): | 20 kΩ balanced or unbalanced bridging |
| Input Level: | +4 dBu nominal (Balanced, Low input sensitivity); -15 dBV nominal (Unbalanced, High input sensitivity) |
| Minimum Input Level: | -18 dBu (Balanced, Max. gain); -19 dBV (Unbalanced Mini-Jack, Max. gain) |
| Maximum Input Level: | +22 dBu (Low input sensitivity); +4 dBu (High input sensitivity) |
| Gain Adjustment: | Single-turn audio taper (Front-panel) |
| Output Power: | 3.5 W RMS (Max., into 8 ohms); 6.5 W RMS (Max., into 4 ohms) |
| Frequency Response: | 20 Hz to 20 kHz (± 1 dB) |
| THD+N: | < 0.1% (@ 1 kHz, 1 W) |
| Noise: | < -80 dB (below 1 W RMS, balanced input); < -70 dB (below 1 W RMS, Mini-Jack input) |
| CMRR: | > 50 dB (50 Hz to 120 Hz) |
| Power Requirement: | 24 Vdc @ 30 mA (Idle); 55 mA (1/8 power; normal voice or music); 225 mA (3.5 W into 8 ohms) |
| Ambient Operating Environment: | 0° C to 40° C Maximum; 20° C Recommended |
| Dimensions: | Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.05 in. 5.21 cm |
| Package Type: | Cardboard Box |
| Package Dimensions: | 3.625 x 4.625 x 2.125 in. |
| Shipping Weight: | .405 lbs. |
| WEEE weight: | .270 lbs. |
| Tariff code: | 8518.40.2000 |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy