Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
XUK1APANM12Main Range of product OsiSense XU Series name General purpose single mode Electronic sensor type Photo electric sensor Sensor name XUK Sensor design Compact 50 x 50 Detection system Reflex Material Plastic Type of output signal Discrete Supply circuit type DC Wiring technique 3 wire Discrete output type PNP Discrete output function 1 NO Electrical connection 1 male connector M12, 4 pins Product specific application Emission Infrared reflex [Sn]
Main
| Range of product | OsiSense XU |
| Series name | General purpose single mode |
| Electronic sensor type | Photo-electric sensor |
| Sensor name | XUK |
| Sensor design | Compact 50 x 50 |
| Detection system | Reflex |
| Material | Plastic |
| Type of output signal | Discrete |
| Supply circuit type | DC |
| Wiring technique | 3-wire |
| Discrete output type | PNP |
| Discrete output function | 1 NO |
| Electrical connection | 1 male connector M12, 4 pins |
| Product specific application | - |
| Emission | Infrared reflex |
| [Sn] nominal sensing distance | 7 m reflex need reflector XUZC50 |
Complementary
| Enclosure material | PBT |
| Lens material | PMMA |
| Maximum sensing distance | 10 m reflex |
| Output type | Solid state |
| Wire insulation material | PVC |
| Status LED | 1 LED (yellow) for output state |
| [Us] rated supply voltage | 12...24 V DC |
| Switching capacity in mA | <= 100 mA (overload and short-circuit protection) |
| Switching frequency | <= 250 Hz |
| Maximum voltage drop | <1.5 V (closed state) |
| Current consumption | <= 35 mA no-load |
| Maximum delay first up | 15 ms |
| Maximum delay response | 2 ms |
| Maximum delay recovery | 2 ms |
| Setting-up | Without sensitivity adjustment |
| Depth | 50 mm |
| Height | 50 mm |
| Width | 18 mm |
| Net weight | 0.07 kg |
Environment
| Product certifications | CSA CE UL |
| Ambient air temperature for operation | -25…55 °C |
| Ambient air temperature for storage | -40…70 °C |
| Vibration resistance | 7 gn, amplitude = +/- 1.5 mm (f = 10…55 Hz) conforming to IEC 60068-2-6 |
| Shock resistance | 30 gn (duration = 11 ms) conforming to IEC 60068-2-27 |
| IP degree of protection | IP65 double insulation conforming to IEC 60529 |
Offer Sustainability
| Sustainable offer status | Green Premium product |
| REACh Regulation | REACh Declaration |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End of Life Information |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1457 reviews
Sort
Product Reviews
★★★★★ 5
e46 Sedan Black Kidney Grill: Good fit with a better attachment mechanism than stock!
Size: For BMW E46 1998-2001
These kidney grill replacements were for a e46 sedan (323i). They fit really well. They come with a different type of attachment mechanism than other types I've used in the past: These have 'posts' with a slight groove that you gently pry into place against the hood's mounting tabs. It's a solid holding mechanism - much better than the tab-types I've seen in the past. These do not wiggle around, and feel very solid once mounted. They DID require a bit of fitting with a dremel where the hood release latch is mounted to the hood. I had to cut back about half-an-inch of the inner 'shell' of the grill so it didn't interfere with the latch when you pull 'up' on it to release the hood. Based on having an e46 sedan for 16+ years, and having replaced the kidney grills several times, I'm quite fine with a little bit of modification for a good fit. I like these quite a bit better than other aftermarket types, and even the OEM BMW grills. The price is good, and mounting is solid. I liked them so much, I purchased a second set for my son's 323i right after putting them on one of my 323i's.
I plan on getting a set for a 325Ci one that car needs replacements.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2021
★★★★★ 5
They fit super snug and the quality is way better than price suggests.
Size: For BMW E46 2002-2005
They came in wrapped very well in foam and bubble wrap. They felt sturdy and the matte finish was satisfactory. They needed quite some pressure to snap in but when they did you could tell they weren’t going anywhere. The fitment is perfect and it looks great. If the stubs in the car where the grille clips attach are in tact you shouldn’t have a problem. Don’t be discouraged by the negative reviews.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 30, 2024
★★★★★ 4
Good value for the money
Size: For BMW E46 2002-2005
The matte is flawless and looks pristine & super easy to install. It does fit and it’s a good enough fit for a daily driver; however, it’s not a flawless fit. It’s off by maybe a 1/16th on the inside corners. It’s amazingly close despite the price point…would definitely recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 28, 2022
★★★★★ 1
VERY poor materials and fit for E46, WILL FALL OUT
Size: For BMW E46 2002-2005, Size: For BMW E46 2002-2005
This part resembles the original, but not enough.
It is both too big AND too small, depending on the dimensions. It's too small from top to bottom, and too big from side to side. The locking tabs don't get close enough to lock (see pics) because there is too little clearance. Viewing from the front, the outer top corner is so far out (see pics) that the most important tab cannot properly lock in, causing the grill to drop out into my hand (or the ground, if I wasn't there to catch it). The grill also is missing some important curves to follow the shape it is supposed to fit into.
It also wasn't matte black as ordered. It looks like it was spray-painted, but I can't be sure. it is made of VERY brittle plastic, and the locking tabs are VERY small and flimsy. I wouldn't expect this part to survive a month or two before blowing away in a medium breeze.
One positive is that there is a relief cut to allow the hood safety catch handle to move fully upward without interfering with the plastic grille. That one positive has a lot of making up to do, and there's no way it can do it. Add to that that the seller included instructions for a car fifteen years newer than the model advertised on the item page, and we have a complete failure. But don't worry! I'm sure the seller will probably delete the listing and make a new one so they don't have to have this honest review attached to it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 6, 2025
★★★★★ 5
Quality grills for e46 BMW
Size: For BMW E46 2002-2005
No reason to buy replacement grills at the dealer or even at an auto parts store. These are great quality for a fraction of the price...and you get both sides. Highly recommended if you have an e46 and the grill plastic has deteriorated and is loose. These grills are thick and robust. I like them better than the original. Fit is snug but they look great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 18, 2025