Dipaco DTech 58 Volt FICM 03-07 6.0L Ford Powerstroke

Dipaco DTech 58 Volt FICM 03-07 6.0L Ford PowerstrokeMany problems, especially hard starts, on the 6. 0L's can be attributed to a poorly functioning FICM. The FICM basically controls the firing of the injectors, and when (and we mean WHEN) the board begins to fail and lose voltage (below factory 48 volts), it will cause various run time issues, hard starts, excessive smoke, and the list goes on. Dipaco builds this 58 Volt FICM to eliminate any intermittent failures. But wait, isn't the factory unit only

Many problems, especially hard starts, on the 6.0L's can be attributed to a poorly functioning FICM. The FICM basically controls the firing of the injectors, and when (and we mean WHEN) the board begins to fail and lose voltage (below factory 48 volts), it will cause various run-time issues, hard starts, excessive smoke, and the list goes on. Dipaco builds this 58 Volt FICM to eliminate any intermittent failures. But wait, isn't the factory unit only 48 volts? Yes, and various companies have determined that 58 volts to the FICM will offer superior injector firing, equating to better power and fuel economy, as well as a longer life.

IMPORTANT NOTES:

• While the FICM is programmed to work with all Ford 6.0L applications, all FICM's still need to have the VIN entered into the FICM as the ECU checks the FICM for matching VIN. If the VIN is not entered, the engine will still operate correctly, but an error code may appear.
• Ford F650/750 applications use VT365 engine with the Navistar engine management system. When the FICM is installed on these models, the engine will run, but the check engine light will be turned on and a DTC is set (DTC 613). The FICM will need to be reprogrammed with the appropriate Navistar device.