Trombone Sheep System

Trombone Sheep SystemThe Trombone Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that they can be driven into the ground. All Ritchie Sheep handling equipment has safe edged sheeting to prevent cuts and abrasions. On the straight sheeted sections the sheet is folded over the frame and the joints are recessed for strength. Heavy duty paneling is used for long working life. A Trombone Sheep

The Trombone Sheep System is made with a hot dipped galvanized finish. The sides can be adjusted for width and the joining pins are long enough that they can be driven into the ground. 

All Ritchie Sheep handling equipment has safe edged sheeting to prevent cuts and abrasions. On the straight sheeted sections the sheet is folded over the frame and the joints are recessed for strength. Heavy-duty paneling is used for long working life. 

A Trombone Sheep Handling System can easily be assembled using the following components:

• 2 x 4 ft Sheeted Panels
• 2 x 8 ft Sheeted Panels
• 3 x 4 ft Open Rail Panels
• 3 x 8 ft Open Rail Panels
• 1 x Race Joiner
• 18 x Joining Pins
• 1 x 2 ft Guillotine Gate (can choose the Guillotine - Walk through Gate instead for extra money)
• 1 x 8 ft Swing Gate in Frame
• 1 x 6 ft Swing Gate in Frame
• 2 x 3 ft Swing Gate in Frame
• 1 x 8 ft Lift/Slide Gate
• 2 x Inner Curved Panels
  
• 4 X Outer Curved Panels
• 4 x Joining Pin Link Brackets
• 1 x Draft/Stop Gate

Optional : 

• Remote Control Lever
• Foot Rot Bath