Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
DPA 4061-OC-C-C34 Core Miniature Omni Microphone - Brownd: screet Core 4061 omnidirectional mic, loud SPL, brown, TRS Locking Mini Jack Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d: screet? 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each
d:screet Core 4061 omnidirectional mic, loud SPL, brown, TRS Locking Mini-Jack
Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet? 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications.
The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments.
The acoustic response of the d:screet? 4060 Series can be modified by selecting the correct grid for the job. Two grids are supplied with each microphone (not the d:screet? 4071, which includes a fixed grid). The pre-fitted Soft Boost Grid gives a 3 dB soft boost at 8-20 kHz. It should be used when the microphone is mounted on the performer's head as well as in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10 dB soft boost around 12 kHz for applications where the microphones chest-placement is preferred. Both of these grids are made of anodized stainless steel, giving a tough and scratch resistant surface. They can be detached from the microphone and cleaned of sweat, makeup, etc.
Flexible adapter system
All of DPA's microphones can be configured to run easily and effortlessly with a wireless system. We use a unique MicroDot termination on our microphones together with a changeable adapter to ensure secure configuration. All of the adapters we use are original, developed and manufactured by the wireless system brand you use. This ensures that your mic will work consistently with no connection trouble to your system.
The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a completely new microphone. When you make the switch, you won't hear any loss or change in sound quality.
Using an adapter for wireless, our microphones with MicroDot termination are compatible with the professional wireless systems listed below. Many of these brands have several model numbers. To ensure compatibility you should find your particular model number, which in most cases can be found on the transmitter. Other configurations are possible; however, DPA Microphones cannot guarantee full compatibility in these cases.
Wireless brands we work with: AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice, Lectrosonics, Line 6, Micron, Mipro, Pastega, Ramsa, Sabine, Samson, Sennheiser, Shure, Sony, Telex, TOA, Trantec, Vega, Wisycom and Zaxcom.
Hardwired versions without the MicroDot connector are also available for various versions. Popular choices are 3-pin LEMO (Sennheiser), Mini-Jack (Sennheiser) and TA4F Mini-XLR (Shure).
If you prefer to run via a wired system, all of our mics are available with an XLR adapter.
Features
Specifications
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, ±2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
Total harmonic distortion (THD) - Legacy: < 1% THD up to 123 dB SPL peak; < 1% THD up to 120 dB SPL RMS sine
Total harmonic distortion (THD) - CORE: < 1% THD up to 137 dB SPL peak
Dynamic range - Legacy: Typ. 97 dB
Dynamic range - CORE: Typ. 111 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 - 40
Cable drive capability: Up to 300 m (984 ft)
Power supply (for full performance) For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
Connector: Mini-Jack
Color: Brown
Weight: 7.5 g (0.26 oz) incl. Cable and MicroDot connector
Microphone diameter: 5.4 mm (0.21 in)
Microphone length: 12.7 mm (0.5 in)
Cable length: 1.8 m (5.9 ft)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH): Up to 90%
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 1059 reviews
Sort
Product Reviews
★★★★★ 5
Super usefull
Color: pink
If you're in search of a stylish and functional way to organize your jewelry while on-the-go, then this pink travel jewelry organizer is definitely worth considering. With its compact design and thoughtful features, it's the perfect accessory for any traveler or jewelry lover.
One of the standout features of this organizer is its size. With a compact design that can easily fit into a purse or suitcase, it's perfect for taking your jewelry with you on the go. And despite its small size, it still offers plenty of storage options - from compartments for necklaces and bracelets to slots for rings and earrings, it can hold all of your essential pieces.
But beyond its size, this travel jewelry organizer is also incredibly stylish. The soft pink color adds a feminine touch, while the sleek design and gold-tone hardware give it a sophisticated look. It's the perfect accessory to carry with you on any trip or to use as a daily storage option for your jewelry.
Another great feature of this organizer is its thoughtful design. The compartments and slots are all padded to protect your jewelry from scratches and damage, while the zippered closure ensures that everything stays secure and in place. Plus, the compact design means that you won't have to worry about your jewelry getting tangled or jumbled together during travel.
Overall, if you're in need of a travel jewelry organizer that is both stylish and functional, this pink option is definitely worth considering. With its compact size, ample storage options, and thoughtful design features, it's a great investment that will help you keep your jewelry organized and protected while on the go.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2023
★★★★★ 5
LOVE, LOVE, LOVE this anklet
Style: Length 11 Inches
I LOVE, LOVE, LOVE this anklet. I never tale it off. It hasn't tarnished or broke and still looks amazing. I did exchange the size to a 9" and it fits perfectly!!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 27, 2025
★★★★★ 5
Ankle bracelet
Style: Length 10 Inches
Great strong connection and lockdown. Wife said love this ankle bracelet.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
★★★★★ 1
Not Worth it !!!!
Style: Length 10 Inches, Style: Length 10 Inches
At first it looked very nice and shiny but i had it for 10 months and it already turned black. Is better to spend a lil more and buy real gold.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 1, 2026
★★★★★ 5
Great Anklet
Style: Length 10 Inches
Love this for my daughter. She loved it even more. She has been wearing it since Xmas and no tarnish. I highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 14, 2026